Skip to content
SPSDPSPlanning & Building Tools

Area Converter (sq ft, sq m, gaj)

Convert square feet, square metres, square yards and gaj.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Convert any area measurement into all common units at once. All conversions use exact factors through a single base unit, so values never get mixed.

Who should use it: Anyone reading measurements from drawings, quotes and product labels.

Formula used

  • Value in target = value x (factor of source / factor of target)

Worked example

Converting 100 sq ft.

sq ft

100

sq m

9.2903

Detailed results
sq yd11.1111
gaj (sq yd)11.1111
sq in14,400
sq cm92,903.04

How this was calculated

  1. 1Method: sq ft to the base unit, then to each target unit.

How to measure

  • Make sure you pick the correct source unit before converting.

Assumptions and limitations

  • Exact international definitions: 1 ft = 0.3048 m, 1 yd = 0.9144 m.
  • Gaj = square yard.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

How many sq ft in one sq m?

One square metre is about 10.764 square feet.