Curtain Fabric Calculator
Find how many metres of curtain fabric you need from the track width, drop, fullness and fabric width.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Curtains look best with fullness - extra fabric gathered along the track. This calculator uses your fullness, hems and fabric width to find panels and metres.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Width needed = track width x fullness
- Panels = width needed / fabric width (round up)
- Cut length = drop + hem allowance
- Fabric = panels x cut length x windows
Worked example
A 6 ft track, 8 ft drop, 2x fullness, 140 cm fabric.
Fabric to buy
8.22 m
| Fabric to buy | 8.98 yd |
|---|---|
| Panels (drops) per window | 3 panels |
| Cut length per panel | 2.74 m |
How this was calculated
- 1Width of fabric needed: 1.83 m x 2 = 3.66 m
- 2Panels: 3.66 / fabric width 1.40 m = 3
Patterned fabric needs extra for pattern matching.
How to measure
- Measure the track width, not the window.
- Measure from the track to the floor (or to the sill) and subtract a small gap.
Assumptions and limitations
- Plain fabric, no pattern repeat.
- Hem allowance is your input.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
How much fullness should I choose?
About 2x suits most curtains; sheers often use more, flat panels less.