Length Converter
Convert mm, cm, metres, inches, feet and yards instantly.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Convert any length measurement into all common units at once. All conversions use exact factors through a single base unit, so values never get mixed.
Who should use it: Anyone reading measurements from drawings, quotes and product labels.
Formula used
- Value in target = value x (factor of source / factor of target)
Worked example
Converting 10 feet.
mm
3,048
cm
304.8
| metres | 3.048 |
|---|---|
| inches | 120 |
| feet | 10 |
| yards | 3.3333 |
How this was calculated
- 1Method: feet to the base unit, then to each target unit.
How to measure
- Make sure you pick the correct source unit before converting.
Assumptions and limitations
- Exact international definitions: 1 ft = 0.3048 m, 1 yd = 0.9144 m.
- Gaj = square yard.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
How many mm in a foot?
One foot is exactly 304.8 mm.