Renovation Budget Calculator
Add up materials, labour, transport, equipment and other costs with tax and contingency to get a renovation budget and cost per sq ft.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Enter your own quotations for each cost group. The calculator adds tax on materials, a contingency allowance, and shows the total and cost per square foot.
It never assumes prices. Use written quotations for reliable results.
Who should use it: Homeowners planning renovation spending.
Formula used
- Subtotal = materials + labour + transport + equipment + misc
- Tax = materials x tax %
- Contingency = (subtotal + tax) x contingency %
- Total = subtotal + tax + contingency
Worked example
Example quotations: materials 250,000; labour 150,000; transport 15,000; equipment 10,000; misc 20,000; 10% contingency.
Total budget
4,89,500 ₹
| Subtotal | 4,45,000 ₹ |
|---|---|
| Tax | 0 ₹ |
| Contingency | 44,500 ₹ |
| Cost per sq ft | 979 ₹ |
How this was calculated
- 1Contingency: (subtotal + tax) x 10%
How to measure
- Use the finished floor area for the cost per sq ft.
Assumptions and limitations
- Only materials are taxed here; edit the tax rate to match your quotes.
- All figures are user-entered.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
How much contingency should I keep?
Old buildings and hidden work (plumbing, waterproofing) justify a larger buffer. Many planners start at around 10%.