Skip to content
SPSDPSPlanning & Building Tools

Volume Converter (m3, cft, litres)

Convert cubic metres, cubic feet, cubic yards, litres and millilitres.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Convert any volume measurement into all common units at once. All conversions use exact factors through a single base unit, so values never get mixed.

Who should use it: Anyone reading measurements from drawings, quotes and product labels.

Formula used

  • Value in target = value x (factor of source / factor of target)

Worked example

Converting 100 cubic ft.

cubic m

2.8317

cubic ft

100

Detailed results
cubic yd3.7037
litres2,831.6847
ml28,31,684.6592

How this was calculated

  1. 1Method: cubic ft to the base unit, then to each target unit.

How to measure

  • Make sure you pick the correct source unit before converting.

Assumptions and limitations

  • Exact international definitions: 1 ft = 0.3048 m, 1 yd = 0.9144 m.
  • Gaj = square yard.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

How many litres in a cubic metre?

One cubic metre is 1,000 litres.