Skip to content
SPSDPSPlanning & Building Tools
InteriorBeginner6 min read

Lighting Your Home: Layers, Placement and Warmth

Plan general, task and accent lighting room by room, and choose bulb warmth and brightness sensibly.

1Three layers

  • General: overall light from ceiling fixtures.
  • Task: focused light for cooking, reading and work.
  • Accent: wall washers, shelf lights and lamps for mood.

2Colour temperature

Colour temperature in kelvin (K) describes warmth. Lower numbers look warmer and are common for living and bedrooms; higher numbers look cooler and are used for task areas like kitchens and study. Choose by feel and test a bulb.

3Plan by room

  • Living: soft general light plus lamps and accent.
  • Bedroom: low, warm general light, bedside lighting.
  • Kitchen: bright general light plus counter lighting.
  • Bathroom: even light at the mirror; use fittings rated for the zone.
  • Study: task light on the desk to reduce glare.

4Do this early

Mark light, switch and dimmer positions before plastering. Have a licensed electrician handle wiring and bathroom zones.

Mistakes to avoid

  • Only one ceiling light in each room.
  • Mixing very different bulb warmths.
  • Placing task lights where you cast a shadow on your work.

Quick answers

How bright should a room be?

It depends on use and taste. Combine layers and use dimmers so you can adjust.

Go deeper

Keep reading

Guidance is general and for planning only. Check product data sheets, local rules and your professionals. Read the disclaimer.