Carpet and Rug Calculator
Work out how much carpet to buy for a room from the roll width, with a cutting allowance.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Carpet is sold from rolls of a fixed width, so you buy a length. Enter the room size and roll width; the calculator finds the running length needed.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Strips = shorter side / roll width, rounded up
- Length = strips x longer side x (1 + allowance)
Worked example
A 14 x 12 ft room with a 12 ft roll.
Carpet length to buy
14.7 ft of roll
| Carpet length to buy | 4.48 m |
|---|---|
| Strips needed | 1 strips |
| Floor area | 168 sq ft |
How this was calculated
- 1Strips: 1 strip(s) across the room
If strips are needed, joins and pattern match can need extra length. Ask the supplier.
How to measure
- Measure the room at its widest.
- Check the roll width with the shop.
Assumptions and limitations
- Strips run along the longer side.
- No pattern repeat.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
What if my room is wider than the roll?
You will need seams. Ask the fitter where to place them.