Flooring Calculator (Planks and Boxes)
Estimate laminate, vinyl or wooden plank flooring packs from room size, pack coverage and wastage.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Plank flooring is sold in packs that each cover a stated area. This calculator divides the room area by pack coverage after adding wastage, and rounds up to whole packs.
Who should use it: Homeowners buying laminate, vinyl or engineered wood flooring.
Formula used
- Area needed = room area x (1 + wastage %)
- Packs = round up (area needed / area per pack)
Worked example
A 14 x 12 ft room with packs that cover 20 sq ft each and 8% wastage.
Packs to buy
10 packs
| Area needed with wastage | 181.44 sq ft |
|---|---|
| Area you will buy | 200 sq ft |
| Room area | 168 sq ft |
How this was calculated
- 1Area with wastage: 168.0 x (1 + 8%) = 181.4 sq ft
How to measure
- Measure the longest and widest points of the room.
- Add alcoves and door recesses to the area.
Assumptions and limitations
- Straight layout. Diagonal layouts need more wastage.
- Underlay, trims and expansion gaps are not included.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Should I buy extra packs?
Buying one pack more than needed is common when the layout is complex, because a later batch may differ in shade.
References
- Flooring manufacturer's installation guide. Expansion gaps and underlay requirements are product-specific.