False Ceiling Calculator (Gypsum Board)
Estimate gypsum boards and the length of perimeter and cross channels for a false ceiling.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
A gypsum false ceiling uses boards fixed to a metal frame. This estimates boards from area and the channel run length from your chosen spacing.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Boards = area / board area x (1 + wastage)
- Channel run = area / spacing
Worked example
A 14 x 12 ft room with 8 x 4 ft boards.
Boards to buy
6 boards
Ceiling area
168 sq ft
| Perimeter channel | 15.85 m |
|---|---|
| Main channel run | 13.01 m |
| Cross channel run | 26.01 m |
How this was calculated
- 1Boards: 168.0 sq ft / board area x (1 + 10%)
Hangers, screws and jointing materials depend on the system. Ask your ceiling contractor for the exact list.
How to measure
- Measure the ceiling area.
- Add extra for coves and drops separately.
Assumptions and limitations
- Flat ceiling, no drops or coves.
- Spacing is your input; follow the system maker.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Does this include lighting cut-outs?
No. Cut-outs cost little board but add labour.