Paint Calculator
Estimate litres of paint and number of cans for a room from its size, coats and your paint's coverage per litre.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
This paint calculator works out the area to be painted, applies the number of coats and divides by the coverage printed on your paint tin. It then adds a wastage allowance and rounds up to whole cans.
Coverage is the single biggest source of error, so the calculator asks for it instead of guessing a brand-specific value.
Who should use it: Homeowners planning to repaint a room and painters preparing a quote.
Formula used
- Paint (litres) = area x coats / coverage per litre
- Litres to buy = paint x (1 + wastage %)
- Cans = round up (litres to buy / can size)
Worked example
A 14 x 12 ft room, 10 ft high, 2 coats at 100 sq ft per litre.
Paint to buy (litres)
10.27 litres
Cans of 4 L
3 cans
| Paint without wastage | 9.34 litres |
|---|---|
| Area to paint | 467 sq ft |
How this was calculated
- 1Area to paint: 467.0 sq ft (walls)
- 2Paint for all coats: area x coats / coverage = 9.34 L
- 3Add wastage: x (1 + 10%) = 10.27 L
How to measure
- Measure walls at their widest points.
- Check the tin: coverage is quoted for smooth, primed surfaces; rough or porous walls need more paint.
Assumptions and limitations
- Coverage is per coat and is entered by you from the product label.
- Ceilings are painted with the same paint and coverage when included.
- Primer and putty are calculated separately.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
How many coats do I need?
Two finish coats over a primed, smooth surface is typical. Strong colour changes may need more.
Why does the answer change with the brand?
Different paints cover different areas per litre. Enter the figure from your tin for a reliable estimate.
References
- Your paint manufacturer's technical data sheet. Coverage and number of coats are product-specific.