Skip to content
SPSDPSPlanning & Building Tools

Tile Calculator

Find how many floor or wall tiles you need, with grout gap, wastage and boxes. Enter room size or total area.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

This tile calculator divides your floor area by the area one tile occupies - including the grout gap - and adds a wastage allowance for cuts and breakage.

If your tiles are sold in boxes, enter the pieces per box and the calculator rounds up to whole boxes.

Who should use it: Homeowners, tile fitters and designers estimating floor or wall tiling.

Formula used

  • Area per tile = (tile length + gap) x (tile width + gap)
  • Tiles = round up (area x (1 + wastage %) / area per tile)
  • Boxes = round up (tiles / tiles per box)

Worked example

A 14 x 12 ft room with 600 x 600 mm tiles, 2 mm gap, 10% wastage, 4 tiles per box.

Tiles to buy (with wastage)

48 tiles

Boxes to buy

12 boxes

Detailed results
Tiles without wastage44 tiles
Floor area168 sq ft
Floor area15.61 sq m

How this was calculated

  1. 1Area per tile (with gap): 3624.0 cm2
  2. 2Tiles needed: round up (area / tile area) = 44
  3. 3With wastage: area x (1 + 10%) / tile area = 48

How to measure

  • Measure length and width of the finished floor area.
  • Subtract fixed areas that will not be tiled (e.g. a built-in platform).
  • Check the actual tile size on the box - nominal and actual sizes can differ.

Assumptions and limitations

  • The floor is a simple rectangle with no cut-outs.
  • Tiles are laid in a straight pattern. Use 10-15% wastage for diagonal or patterned layouts.
  • Tile size is the nominal size printed on the box.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

How much extra tile should I order?

Many fitters allow around 10% for straight layouts and more for diagonal layouts or small rooms. Always keep a few spare tiles from the same batch.

Does the calculator include the grout gap?

Yes. The gap is added to each tile dimension. A 0 gap is allowed for rectified tiles laid tightly.

References

  • Tile manufacturer's packing and size information. Pieces per box and actual sizes differ by product.