House Construction Cost Estimator
Estimate a total construction budget from built-up area, number of floors and your local rate per sq ft, with extras and contingency.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
This multiplies built-up area by the rate you enter, then adds extras and a contingency. We do not supply prices - use quotations from your area.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Base = area x floors x rate
- Total = (base + extras) x (1 + contingency)
Worked example
1,000 sq ft, 1 floor, example rate, 15% extras and 10% contingency.
Estimated total
18,97,500 ₹
Total built-up area
1,000 sq ft
| Base cost | 15,00,000 ₹ |
|---|---|
| Extras | 2,25,000 ₹ |
| Contingency | 1,72,500 ₹ |
| Cost per sq ft (all-in) | 1,898 ₹ |
How this was calculated
- 1Base: 1000 sq ft x rate
The default rate is only an example, not a market price. Replace it with quotations from your area.
How to measure
- Use the built-up area from your plan.
Assumptions and limitations
- One rate for the whole building.
- Land, approvals and interiors excluded unless in extras.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Which rate should I use?
Ask contractors in your city for a rate for the specification you want.