Skip to content
SPSDPSPlanning & Building Tools

Inverter and Battery Backup Calculator

Estimate inverter size and battery capacity (Ah) from your backup load and the hours of backup you need.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Battery capacity depends on the load, backup hours, battery voltage, how deeply you discharge, and inverter efficiency.

Who should use it: Homeowners, DIY builders and contractors planning a project.

Formula used

  • Energy (Wh) = load x hours
  • Battery Ah = Wh / (voltage x efficiency x depth of discharge)
  • Inverter VA = load / power factor x 1.25

Worked example

500 W for 4 hours on a 12 V system.

Battery capacity needed

392 Ah

Inverter size (with 25% margin)

781 VA

Detailed results
Energy for backup2 kWh

How this was calculated

  1. 1Energy: 500 W x 4 h = 2000 Wh
  2. 2Battery: 2000 / (12 V x 85% x 50%)

Rule-of-thumb estimate. Confirm with a qualified professional or the product data sheet.

How to measure

  • Add the watts of everything you will run during an outage.

Assumptions and limitations

  • Constant load.
  • Starting surges of motors (fridge, pump) are covered only by the margin.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Why 50% depth of discharge?

Many lead-acid batteries last longer if not fully drained. Use your battery data sheet.