Home Electrical Load Calculator
Add up connected load from lights, fans, AC and appliances to estimate total kW and current.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Enter how many of each item you have and its power. The calculator totals the connected load and the current at 230 V.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Connected load = sum of (count x watts)
- Demand = connected load x demand factor
- Current = watts / 230 (power factor ignored)
Worked example
A typical 2 AC flat.
Connected load
5.64 kW
Estimated demand
5.64 kW
| Current at 230 V (demand) | 24.54 A |
|---|---|
| Connected load | 5,644 watts |
How this was calculated
- 1Total: lights + fans + ACs + fridges + others = 5644 W
Planning aid only. Wiring, breakers and sanction load must be set by a licensed electrician and your utility.
How to measure
- Count appliances room by room.
- Read watts on each appliance label.
Assumptions and limitations
- Single phase 230 V.
- Power factor of 1 for simplicity.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Can I use this to choose cable size?
No. Cable and breaker sizes need an electrician's design.