Room Lighting Calculator (Lumens and Fixtures)
Estimate the lumens and number of light fixtures a room needs from its area and the brightness you want.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Lighting is planned in lumens. This estimate multiplies room area by a target brightness (lux) and adjusts for how much light reaches the floor.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Lumens = area (m2) x lux / utilisation factor
- Fixtures = lumens / lumens per fixture
Worked example
A 14 x 12 ft living room at 150 lux with 800 lumen fixtures.
Fixtures needed
6 fixtures
Total lumens needed
4,682 lumens
| Room area | 168 sq ft |
|---|
How this was calculated
- 1Lumens: 15.6 m2 x 150 lux / 0.5 = 4682
Rule-of-thumb estimate. Confirm with a qualified professional or the product data sheet.
Use layers of light: general, task and accent.
How to measure
- Measure the room floor area.
- Read lumens on the bulb or fixture.
Assumptions and limitations
- Lux targets are planning values, not legal requirements.
- Utilisation depends on wall colour and fixture type.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Is more lumens always better?
No. Too bright causes glare. Use dimmers and several sources.