Skip to content
SPSDPSPlanning & Building Tools

Plywood and Board Sheet Calculator

Estimate how many plywood or board sheets you need from the total panel area and cutting loss.

%

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Add up the area of all panels (shelves, shutters, sides) and divide by the sheet area. Cutting loss is higher for many small pieces.

Who should use it: Homeowners, DIY builders and contractors planning a project.

Formula used

  • Sheets = panel area / sheet area x (1 + loss)

Worked example

120 sq ft of panels from 8 x 4 ft sheets, 15% loss.

Sheets to buy

5 sheets

Detailed results
Panel area120 sq ft
Sheet area32.04 sq ft
Area bought160.21 sq ft

How this was calculated

  1. 1Sheets: 120.0 / 32.0 x (1 + 15%) = 5

Ask your carpenter for a cutting plan; real loss depends on piece sizes and grain direction.

How to measure

  • List every panel with length x width and add the areas.

Assumptions and limitations

  • Pieces are nested efficiently within the loss percentage.
  • Thickness is not part of the area.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

What loss should I use?

Around 10-15% for large panels and more for many small parts.