Primer Calculator
Calculate the litres of wall primer needed for a room, with coats, coverage and wastage.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Primer seals the wall and helps the paint bond evenly. The calculation is the same as for paint, using the primer coverage from its label.
Who should use it: Anyone priming new plaster, putty or previously painted walls.
Formula used
- Primer (litres) = area x coats / coverage per litre
Worked example
A 14 x 12 ft room, 10 ft high, one coat at 120 sq ft per litre.
Primer to buy
4.28 litres
Cans of 4 L
2 cans
| Area to prime | 467 sq ft |
|---|
How this was calculated
- 1Primer for all coats: area x coats / coverage = 3.89 L
How to measure
- Use the same wall area as for painting.
Assumptions and limitations
- One coat of primer unless you change it.
- Coverage comes from your primer label.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Is primer needed on already painted walls?
Not always. Sound, clean painted walls may only need a light sand. Follow your paint maker's instructions.
References
- Your primer manufacturer's technical data sheet. Coverage is surface-dependent.