Roof Area Calculator
Calculate the surface area of a simple pitched roof from building size, overhang and pitch.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
A sloping roof has more surface than the floor beneath it. The slope factor from the pitch converts the plan area (including eaves) into the true roof surface to be covered.
Who should use it: Homeowners estimating roof sheets, tiles or waterproofing.
Formula used
- Slope factor = 1 / cos(angle) = sqrt(1 + (rise / run)^2)
- Roof area = (L + 2 x overhang) x (W + 2 x overhang) x slope factor
Worked example
A 30 x 20 ft building, 1 ft eaves, 25 degree pitch.
Roof surface area
776.78 sq ft
Roof surface area
72.17 sq m
| Area with wastage | 854.46 sq ft |
|---|---|
| Slope factor | 1.103 |
| Plan area incl. eaves | 704 sq ft |
How this was calculated
- 1Plan area: (L + 2 x overhang) x (W + 2 x overhang) = 65.4 m2
- 2Surface area: plan area x slope factor 1.103 = 72.2 m2
How to measure
- Measure the building footprint, then the eave projection.
- Measure the angle with a phone level app or from drawings.
Assumptions and limitations
- Simple gable or hip roof with the same pitch on every slope.
- Valleys, dormers, chimneys and skylights are ignored.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Does this work for a flat roof?
Use a 0 degree angle. The area then equals the plan area including overhang.