Skip to content
SPSDPSPlanning & Building Tools

Paver Block Calculator

Estimate paver blocks and bedding sand for a driveway, patio or path from area, block size and joint.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Pavers are laid on a compacted sand bed. This calculator counts pavers including joints and wastage, and estimates the bedding sand volume.

Who should use it: Homeowners paving driveways, patios and garden paths.

Formula used

  • Pavers = round up (area x (1 + wastage %) / ((l + j) x (w + j)))
  • Bedding sand = area x bed thickness

Worked example

300 sq ft paved with 200 x 100 mm blocks and a 40 mm sand bed.

Pavers to buy

1,400 pieces

Bedding sand

1.11 m3

Detailed results
Pavers without wastage1,333 pieces
Bedding sand39.37 cft
Area300 sq ft

How this was calculated

  1. 1Pavers: area x (1 + wastage) / ((l + joint) x (w + joint))

How to measure

  • Measure the paved area. For curved edges, take the larger rectangle and raise wastage.

Assumptions and limitations

  • The base layers (sub-base, compaction) are not included.
  • Edge restraints and cuts are covered by wastage.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

How much wastage for curved edges?

Curves and many cuts can need 10% or more.