Staircase Measurement Estimator
Estimate the number of steps, riser height and total run of a straight staircase from the floor-to-floor height.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Divide the total rise by a comfortable riser height to get the number of steps, then recompute the exact riser. A common comfort check is 2 x riser + tread.
This is a planning estimator. Stair design must meet local building rules and be checked by a professional.
Who should use it: Homeowners planning stairs or loft access.
Formula used
- Risers = round (total rise / preferred riser)
- Exact riser = total rise / risers
- Treads = risers - 1
- Run = treads x tread depth
Worked example
10 ft floor to floor, 165 mm riser, 275 mm tread.
Number of risers
18
Exact riser height
169.33 mm
| Number of treads | 17 |
|---|---|
| Total horizontal run | 4.68 m |
| 2 x riser + treadOften about 600 - 650 mm for comfort | 613.67 mm |
How this was calculated
- 1Risers: round (total rise / preferred riser) = 18
Planning estimate only. Check local building rules for maximum riser, minimum tread and headroom.
How to measure
- Measure from finished floor to finished floor.
- Allow for the thickness of floor finishes.
Assumptions and limitations
- Straight flight, landing and winders are not included.
- The top step is the upper floor.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Is this enough to build a staircase?
No. It is a planning aid. Final dimensions must follow local building rules and your designer.
References
- National Building Code of India (NBC). Stair dimension requirements are set in the current code and local rules.