Stone and Marble Flooring Calculator
Estimate stone, marble or granite slabs for a floor with wastage, plus the polishing area to budget for.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Natural stone has more cutting loss than tile because patterns and veins are matched. Enter your slab size and an allowance for loss.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Slabs = floor area / slab area x (1 + wastage)
Worked example
A 15 x 12 ft room with 2 x 2 ft slabs.
Slabs to buy
51 slabs
Floor area
180 sq ft
| Area to buy | 204 sq ft |
|---|---|
| Polishing area (approx.) | 180 sq ft |
How this was calculated
- 1Slabs: 180.0 sq ft / 4.00 sq ft x (1 + 12%)
Stone thickness and weight affect the floor load. Ask the supplier.
How to measure
- Measure the room wall to wall.
- Use the actual slab size after trimming.
Assumptions and limitations
- Slabs are laid whole and trimmed at walls.
- Polishing area is taken equal to the floor area.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Why higher wastage than tile?
Stone is cut to match veins and edges, and some pieces are rejected for flaws.