Excavation Calculator
Calculate excavation volume for a trench or pit and the soil volume to carry away after bulking, with truck loads.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Excavation volume is length x width x depth. Soil swells (bulks) after digging, so the volume to haul is larger than the hole.
Who should use it: Contractors and homeowners planning foundations, tanks or pits.
Formula used
- Volume = length x width x depth
- Loose volume = volume x (1 + bulking %)
- Loads = round up (loose volume / truck capacity)
Worked example
A 20 x 10 ft pit, 4 ft deep, 20% bulking, 6 m3 truck.
Volume in the ground
22.65 m3
| Volume in the ground | 800 cft |
|---|---|
| Loose soil to haul | 27.18 m3 |
| Truck loads | 5 loads |
How this was calculated
- 1Volume: length x width x depth = 22.65 m3
Deep trenches can collapse. Follow site safety rules and use shoring where required.
How to measure
- Measure the excavation at the base and add working space if required.
Assumptions and limitations
- Vertical sides and uniform depth.
- Bulking depends on soil and is your input.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Why do I need bulking?
Digging loosens the soil, so it occupies more volume than it did in the ground.