Skip to content
SPSDPSPlanning & Building Tools

RCC Slab Quantity Calculator

Estimate concrete volume, cement, sand, aggregate and a rough steel quantity for an RCC slab. Estimate only - not a design.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

This calculator estimates the concrete quantity for a rectangular RCC slab and a rough steel quantity from an assumed kilograms per cubic metre. Steel in a real slab is set by structural design.

Who should use it: Homeowners checking budgets and quotations for a slab.

Formula used

  • Concrete volume = length x width x thickness
  • Steel (budget only) = volume x assumed kg/m3

Worked example

A 15 x 12 ft slab, 125 mm thick, M20 mix.

Concrete volume

2.09 m3

Cement

18 bags (50 kg)

Sand

0.92 m3

Aggregate

1.84 m3

Detailed results
Concrete volume73.82 cft
Sand32.55 cft
Aggregate65.11 cft
Rough steel budget figureNot a design value167.23 kg

How this was calculated

  1. 1Slab volume: 4.57 x 3.66 x 0.125 m = 2.090 m3

This is a material quantity estimate, not a structural design. Structural members must be designed and checked by a qualified structural engineer.

How to measure

  • Measure the slab span between support lines.
  • Use drawn slab thickness from the engineer.

Assumptions and limitations

  • Solid rectangular slab, no beams, sunk portions or openings.
  • Steel kg/m3 is a rough budget figure and is not a design.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Is the steel figure what I should order?

No. Order steel from the bar bending schedule prepared by the structural engineer.

References

  • IS 456:2000 - Plain and Reinforced Concrete, Code of Practice. Design and detailing of RCC. Consult the current edition.