Tile Grout Calculator
Calculate kilograms of tile grout from tile size, joint width and tile thickness using the joint-volume method.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Grout fills the joints between tiles. The amount depends on joint width and tile thickness - wide joints and thick tiles use much more grout. This calculator uses the standard joint-volume method.
Who should use it: Tilers and homeowners ordering grout.
Formula used
- Grout per m2 = (L + W) x J x T / (L x W) x density
- Total grout = grout per m2 x area x (1 + wastage %)
Worked example
14 x 12 ft floor, 600 x 600 mm tiles, 3 mm joint, 8 mm thick tiles.
Grout to buy
2.2 kg
| Grout without wastage | 2 kg |
|---|---|
| Grout per m2 | 0.128 kg/m2 |
| Area | 168 sq ft |
How this was calculated
- 1Grout per m2: (L + W) x joint x thickness / (L x W) x density
How to measure
- Measure tile thickness with callipers or read the box.
- Joint width is the spacer size you will use.
Assumptions and limitations
- L, W, J and T are in metres inside the formula.
- Grout fills the full tile thickness.
- Epoxy and special grouts differ - use your product data.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Why does this give such small numbers for large tiles?
Large tiles have fewer joints per square metre, so less grout is needed than with small tiles.
References
- Grout manufacturer's data sheet. Density and yield are product-specific.