Skip to content
SPSDPSPlanning & Building Tools

Tile Adhesive Calculator

Estimate bags of tile adhesive for a floor or wall from area, consumption per square metre and bag size.

kg/m2

From the adhesive data sheet for your tile size and trowel.

kg

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Adhesive consumption depends on the tile size, the trowel notch and the substrate. This calculator uses the consumption per square metre that you enter from the adhesive data sheet, then rounds up to whole bags.

Who should use it: Tile fitters and homeowners ordering adhesive.

Formula used

  • Adhesive (kg) = area in m2 x consumption in kg/m2 x (1 + wastage %)
  • Bags = round up (kg / bag size)

Worked example

A 14 x 12 ft floor at 4.5 kg/m2 using 20 kg bags.

Bags of 20 kg

4 bags

Adhesive with wastage

73.75 kg

Detailed results
Adhesive without wastage70.23 kg
Area168 sq ft

How this was calculated

  1. 1Adhesive: area (m2) x consumption = 70.2 kg

How to measure

  • Use the same area as the tile estimate.
  • Ask the supplier for the data-sheet consumption for your trowel size.

Assumptions and limitations

  • The default 4.5 kg/m2 is only a starting value; large tiles or uneven floors need more.
  • Back-buttering is not separately counted.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Why is my adhesive usage higher than the estimate?

Uneven slabs, large format tiles and thick beds all increase consumption. Use the data sheet figure for your case.

References

  • Adhesive manufacturer's technical data sheet. Consumption depends on trowel notch size and substrate.