Skip to content
SPSDPSPlanning & Building Tools

Wall Area Calculator

Calculate the paintable wall area of a room after deducting doors and windows. Results in sq ft and sq m.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Wall area is the starting number for paint, putty, primer and wallpaper estimates. This calculator multiplies the room perimeter by the wall height and then deducts door and window openings.

Use it when you only need the area, or to double-check the area used in other SPSDPS calculators.

Who should use it: Homeowners, painters and interior designers who need a quick, correct paintable area.

Formula used

  • Wall area = 2 x (length + width) x height
  • Net wall area = wall area - (doors + windows)

Worked example

A 14 ft x 12 ft room with 10 ft walls, one 3 x 7 ft door and two 4 x 4 ft windows.

Net wall area

467 sq ft

Detailed results
Net wall area43.39 sq m
Gross wall area (before openings)520 sq ft
Doors + windows deducted53 sq ft

How this was calculated

  1. 1Perimeter: 2 x (length + width) = 15.85 m
  2. 2Gross wall area: perimeter x height = 48.31 m2
  3. 3Net wall area: gross - openings (4.92 m2) = 43.39 m2

How to measure

  • Measure length and width at floor level along the walls.
  • Measure the height from floor to ceiling.
  • Measure each opening including the frame if the frame will not be painted the same way.

Assumptions and limitations

  • The room is rectangular with flat walls.
  • Each door and window has the same size as entered.
  • Skirting, alcoves and wall niches are ignored.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Should I deduct windows and doors?

Yes for paint quantity. Deduct them, then add a wastage allowance - the allowance usually covers the small areas you re-paint around frames.

Does this include the ceiling?

Only if you tick "Include ceiling area". The ceiling equals the floor area for a flat ceiling.

References

  • IS 1200 - Method of measurement of building and civil engineering works. Describes how deductions for openings are measured in formal estimates. Consult the current edition.