Skip to content
SPSDPSPlanning & Building Tools

Steel Bar Weight Calculator

Calculate the weight of reinforcement bars from diameter, length per bar and number of bars using the d squared / 162 formula.

mm

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

The mass of a round steel bar follows from its cross-section and the density of steel (7,850 kg/m3). For bar diameter d in mm the mass per metre is d x d / 162.2 kg.

Who should use it: Contractors and site supervisors checking bar deliveries against the schedule.

Formula used

  • Weight per metre = d x d / 162.2 (d in mm)
  • Total weight = weight per metre x length per bar x number of bars

Worked example

10 bars of 12 mm diameter, 12 m long.

Total weight

106.54 kg

Detailed results
Total weight0.107 tonnes
Weight per metre0.888 kg/m
Total length120 m

How this was calculated

  1. 1Weight per metre: d x d / 162.2 = 0.888 kg/m

How to measure

  • Use the bar bending schedule for lengths.
  • Check the diameter marked on the bar.

Assumptions and limitations

  • Plain round section at 7,850 kg/m3.
  • Rib projections on deformed bars are ignored; delivered mass can differ slightly within tolerance.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Is 12 mm bar really 0.888 kg per metre?

Yes: 12 x 12 / 162.2 gives about 0.888 kg/m.

References

  • IS 1786 - High strength deformed steel bars for concrete reinforcement. Lists nominal mass and tolerances. Consult the current edition.