Skip to content
SPSDPSPlanning & Building Tools

Wallpaper Calculator

Work out how many wallpaper rolls you need using the strip method, including pattern repeat.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Wallpaper is sold in rolls of fixed width and length, and every strip must be cut to full wall height plus pattern repeat. This calculator counts the strips needed to go around the room and how many strips one roll yields.

It is deliberately conservative: openings are not deducted because strips above and below windows still use paper.

Who should use it: Homeowners papering all walls of a room.

Formula used

  • Strips = round up (room perimeter / roll width)
  • Strip length = wall height + pattern repeat + trim
  • Rolls = round up (strips / strips per roll)

Worked example

A 14 x 12 ft room, 10 ft walls, 53 cm x 10 m roll, no repeat.

Rolls needed

10 rolls

Detailed results
Strips around the room30 strips
Strips from one roll3 strips
Length of each strip3.15 m

How this was calculated

  1. 1Strips: round up (perimeter 15.85 m / roll width) = 30
  2. 2Strip length: height + repeat + 0.1 m trim = 3.15 m
  3. 3Rolls: round up (30 / 3) = 10

How to measure

  • Measure the perimeter along the walls you will paper.
  • Check the repeat on the roll label.

Assumptions and limitations

  • A 10 cm trim allowance is added to every strip.
  • Openings are not deducted.
  • Strips are hung vertically.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Should I buy an extra roll?

Buy all rolls from the same batch and consider one spare roll for repairs, especially with patterned paper.

References

  • Wallpaper manufacturer's installation guide. Roll size and repeat are product-specific.