Skip to content
SPSDPSPlanning & Building Tools

Waterproofing Coating Calculator

Estimate the waterproofing coating needed for a bathroom floor or terrace from area, coats and product coverage.

Area one litre / kg covers in a single coat. Read it from the product tin or technical data sheet - it varies by brand and surface.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Waterproofing coatings are applied in coats and the quantity depends strongly on the product system. This calculator estimates the coating from the area, coats and coverage per kg that you enter.

Use it for budgeting only. The waterproofing system, surface preparation and upturn heights must follow the product manufacturer's method.

Who should use it: Homeowners and contractors budgeting for bathroom, balcony or terrace waterproofing.

Formula used

  • Coating (kg) = (floor area + upturn area) x coats / coverage per kg

Worked example

A 8 x 6 ft bathroom floor with 1 ft upturn, two coats at 10 sq ft per kg.

Coating to buy

16.72 kg

Detailed results
Coating without wastage15.2 kg
Area to waterproof76 sq ft

How this was calculated

  1. 1Coating for all coats: area x coats / coverage = 15.2 kg

This is a quantity estimate only. Follow the manufacturer's system and ask a qualified waterproofing contractor to inspect the surface.

How to measure

  • Measure the floor to the inside face of the walls.
  • Decide the upturn height with your contractor.

Assumptions and limitations

  • Coverage is taken from your product data sheet.
  • Upturn area = perimeter x upturn height.
  • Membrane, mesh, sealants and primers are not included.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Can I use this as a specification?

No. It estimates quantity for budgeting. Waterproofing systems have strict preparation and curing requirements.

References

  • Waterproofing manufacturer's application guide. System, consumption and curing times are product-specific.