Skip to content
SPSDPSPlanning & Building Tools
MaterialsBeginner5 min read

How to Read a Tile Box: Absorption, Slip, Batch and Shade

Understand the water absorption group, size, batch code and other details on a tile box before you buy.

1Water absorption groups

Tile standards group fired tiles by how much water they absorb. A lower figure means a denser, stronger tile. Under ISO 13006 / IS 15622, the groups are BIa (0.5% or less), BIb (above 0.5% to 3%), BIIa (3% to 6%), BIIb (6% to 10%) and BIII (above 10%). Confirm limits in the current standard text.

2What to look for on the box

  • Nominal size and thickness.
  • Pieces per box and area per box.
  • Batch / lot and shade or calibre code.
  • Surface finish and any slip-resistance rating.
  • Intended use: wall, floor, indoor, outdoor.

3Use the right group in the right place

BIII tiles are normally wall-only. Floors in busy or wet areas should use low-absorption groups with a suitable slip rating. The slip rating is product-specific, so ask for the test data.

Mistakes to avoid

  • Mixing batches in one room.
  • Using a wall tile on the floor.
  • Ignoring tile thickness when planning door clearances.

Quick answers

What does rectified mean?

Rectified tiles are cut after firing for very consistent edges, so joints can be narrow. They still need correct installation.

Go deeper

Try the calculators

Keep reading

Guidance is general and for planning only. Check product data sheets, local rules and your professionals. Read the disclaimer.