Skip to content
SPSDPSPlanning & Building Tools

Tiles by water absorption: ceramic, vitrified, porcelain

Marketing names (ceramic, vitrified, porcelain, GVT) overlap. The reliable way to compare tiles is the water absorption group printed in the tile test data - lower absorption means denser, stronger, more frost- and stain-resistant tile.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Ignore marketing names. Check the water-absorption group, slip resistance and where the tile is allowed to be used.

If your situation is this, choose that
If you need...ConsiderWhy
Bathroom or kitchen wallWall ceramic (BIII)Lightweight with many designs; walls only.
Bathroom or balcony floorAnti-skid vitrified or porcelainLow water absorption and slip resistance for wet areas.
Living room floorsVitrified (BIb)Strong, low-maintenance and widely available.
Heavy traffic or outdoorPorcelain (BIa)Densest group; check frost and slip ratings.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
Wall ceramic tile (group BIII)LowerInterior wall cladding, kitchen and bathroom dado.High absorption, not suitable for floors
Ceramic floor tile (groups BIIa / BIIb)Lower to mediumBedrooms and normal-traffic indoor floors; walls.Less dense than vitrified
Vitrified tile (group BIb)MediumLiving areas, kitchens and most home floors.Polished finishes can be slippery when wet
Porcelain / fully vitrified (group BIa)Medium to higherBalconies, terraces, commercial and heavy-use floors.Higher cost

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

Wall ceramic tile (group BIII)

Standard: IS 15622 / ISO 13006

Relative cost: Lower

Specifications

  • Water absorption

    More than 10%

    Verified- Studio Matrx guide

  • Intended use per guide

    Walls only

    Verified- Studio Matrx guide

Advantages

  • Large design range
  • Economical for walls

Disadvantages

  • High absorption, not suitable for floors

Best for

Interior wall cladding, kitchen and bathroom dado.

Avoid

Floors and outdoor use.

Ceramic floor tile (groups BIIa / BIIb)

Standard: IS 15622 / ISO 13006

Relative cost: Lower to medium

Specifications

  • Water absorption BIIa

    3% to 6%

    Verified- Studio Matrx guide

  • Water absorption BIIb

    6% to 10%

    Verified- Studio Matrx guide

Advantages

  • Economical floor option for normal indoor traffic

Disadvantages

  • Less dense than vitrified
  • BIIb suits light duty only

Best for

Bedrooms and normal-traffic indoor floors; walls.

Avoid

Heavy traffic, outdoors and constantly wet floors.

Vitrified tile (group BIb)

Standard: IS 15622 / ISO 13006

Relative cost: Medium

Specifications

  • Water absorption

    Above 0.5% up to 3%

    Verified- Studio Matrx guide

  • Typical use per guide

    General home and light-commercial floors, wet areas

    Verified- Studio Matrx guide

Advantages

  • Dense, durable body
  • Many sizes and finishes

Disadvantages

  • Polished finishes can be slippery when wet
  • Large sizes are heavy to handle

Best for

Living areas, kitchens and most home floors.

Avoid

Smooth polished finish on wet, sloping floors.

Common mistakes

  • Using a wall tile on a floor.
  • Buying by looks without checking batch and shade codes.
  • Choosing glossy tiles for wet floors.

Ask the shop

  • What is the water absorption group and slip-resistance rating?
  • Which batch / shade is this box?
  • How many pieces and how many square feet per box?

Words you will hear

Water absorption
How much water a fired tile soaks up; lower is denser.
GVT / PGVT
Printed vitrified tiles with a glossy surface layer.
Rectified
Edges cut precisely for narrow joints.

Next steps

How to choose

  • Ask for the water absorption group (BIa, BIb, BIIa, BIIb, BIII) and breaking strength from the box or test report.
  • Never use a BIII wall tile on a floor.
  • For wet floors check the slip-resistance rating, not just the group.
  • Buy all tiles for a room from one batch (same shade and size code).

Sources and how far to trust them

Limits of this comparison: IS 15622 defines five water absorption groups. The percentage limits below are from a reference guide to ISO 13006 - confirm them in the current IS 15622 / ISO 13006 text. Slip resistance and breaking strength are product-specific.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More finishes comparisons