Skip to content
SPSDPSPlanning & Building Tools

Plywood and engineered boards

For interiors, the main risk is moisture. IS 303 plywood grades describe how well the glue bond survives water; boards like MDF and particle board behave very differently when wet.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Water exposure decides the board. Interior-dry furniture and kitchens or bathrooms need different grades.

If your situation is this, choose that
If you need...ConsiderWhy
Dry bedroom wardrobe or study tableMR plywood or HDHMRFine in dry rooms.
Kitchen cabinets and under-sink areasBWR / BWP plywood or HDHMRBetter moisture and boil resistance.
Bathroom or heavy dampBWP / marine-grade plywoodDesigned for wet exposure.
Painted, smooth-surface furnitureMDFSmooth for paint; poor if soaked.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
MR plywoodLower to mediumWardrobes and furniture in dry rooms.Not for repeated wetting
BWR plywoodMediumKitchen cabinets away from direct water, humid areas.Edges still need sealing
BWP / marine plywoodHigherBathroom units and wet-area joinery.Costs more
MDFLower to mediumDry-room decorative panels and paint-finish doors.Swells badly when wet
Particle boardLowerBudget shelving in dry rooms.Poor water tolerance
HDHMR boardMediumModular kitchens and wardrobes when the product is rated for it.Heavier

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

MR plywood

Standard: IS 303

Relative cost: Lower to medium

Specifications

  • Meaning

    Moisture Resistant grade

    Verified- Ply Reporter

  • Standard

    Covered by IS 303 (general-purpose plywood)

    Verified- Ply Reporter

Advantages

  • Economical
  • Suitable for dry interior furniture

Disadvantages

  • Not for repeated wetting

Best for

Wardrobes and furniture in dry rooms.

Avoid

Kitchens and bathrooms.

BWR plywood

Standard: IS 303

Relative cost: Medium

Specifications

  • Meaning

    Boiling Water Resistant grade

    Verified- Ply Reporter

Advantages

  • Better water resistance than MR

Disadvantages

  • Edges still need sealing

Best for

Kitchen cabinets away from direct water, humid areas.

Avoid

Permanently wet locations.

BWP / marine plywood

Standard: IS 710 (BWP now also in IS 303)

Relative cost: Higher

Specifications

  • Meaning

    Boiling Water Proof; marine grade under IS 710

    Verified- Ply Reporter

  • Reported change

    BWP grade was added to IS 303 so the 710 / BWP confusion is resolved

    Verified- Ply Reporter

Advantages

  • Highest water resistance of the grades listed

Disadvantages

  • Costs more

Best for

Bathroom units and wet-area joinery.

Avoid

Paying for it where MR is enough.

Common mistakes

  • Using particle board or MDF where it can get soaked.
  • Ignoring edge sealing on cut boards.
  • Assuming a brand name guarantees the grade without a standard mark.

Ask the shop

  • Is it marked to the relevant IS standard?
  • What are the thickness, glue type and warranty?
  • Is the edge sealed?

Words you will hear

MR / BWR / BWP
Moisture-resistant / boiling water resistant / boiling water proof grades.
HDHMR
High-density high-moisture-resistance fibreboard.
Laminate
Decorative surface sheet bonded to boards.

Next steps

How to choose

  • Match the grade to moisture exposure: kitchen and bathroom units need water-resistant boards and sealed edges.
  • Check the BIS mark and grade on the sheet.
  • Use laminate or edge banding to seal exposed edges.
  • Store sheets flat and dry before cutting.

Sources and how far to trust them

Limits of this comparison: Grade definitions come from a trade-press article about IS 303 and IS 710. Check current BIS standards. MDF, particle board and HDHMR notes are general guidance.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More services comparisons