Skip to content
SPSDPSPlanning & Building Tools

Window frame materials compared

The frame matters for sealing, rain, noise and heat. Glass specification matters just as much, so compare the complete window.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Frame material decides upkeep, looks and cost. Glass and sealing decide comfort.

If your situation is this, choose that
If you need...ConsiderWhy
Low maintenance, sealed against dust and noiseuPVCGood sealing and no repainting; check profile quality.
Slim frames and large panesAluminiumStrong and slim; check thermal break and finish.
Traditional look for main doorsTimberNeeds seasoning and periodic polish.
Security grills or budget service doorsMild steelStrong but must be painted against rust.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
uPVCMediumHomes needing noise and dust control.Colour options are narrower
AluminiumMedium to higherLarge openings and modern designs.Conducts heat unless thermally broken
TimberMedium to higherTraditional designs and sheltered openings.Needs regular maintenance
Mild steelLower to mediumSecure openings and budget projects.Rusts if coating fails

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

uPVC

Standard: Product-specific

Relative cost: Medium

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Low maintenance
  • Good sealing with quality gaskets

Disadvantages

  • Colour options are narrower
  • Large spans need reinforcement

Best for

Homes needing noise and dust control.

Avoid

Very large spans without steel reinforcement.

Aluminium

Standard: Product-specific

Relative cost: Medium to higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Slim frames, large glass areas
  • Durable coatings

Disadvantages

  • Conducts heat unless thermally broken
  • Higher cost for good systems

Best for

Large openings and modern designs.

Avoid

Unbroken aluminium in hot, sunny elevations.

Timber

Standard: Product-specific

Relative cost: Medium to higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Warm, natural, repairable

Disadvantages

  • Needs regular maintenance
  • Can swell or warp if poorly seasoned

Best for

Traditional designs and sheltered openings.

Avoid

Exposed, high-rain locations without maintenance.

Common mistakes

  • Choosing glass by looks and ignoring sun exposure.
  • Skipping the sealant and drip detail on the outside.
  • Not measuring after plaster is complete.

Ask the shop

  • What is the profile / wall thickness and glass type?
  • What hardware is included?
  • What is the installation and warranty policy?

Words you will hear

Thermal break
Insulating strip inside an aluminium frame.
Glazing
The glass part of a window.
Sash
The moving part of a window.

Next steps

How to choose

  • Ask for the complete window specification, not just the frame.
  • Check drainage channels and gasket quality.
  • Look at hardware: hinges and locks fail first.
  • Check the installation method in your wall type.

Sources and how far to trust them

Limits of this comparison: Qualitative guidance. U-values and rain-tightness are product-specific.

This category uses general professional guidance, not quoted standard values. Read the product data sheet and ask for test reports.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More envelope comparisons