Skip to content
SPSDPSPlanning & Building Tools

Roofing materials compared

Roofs combine structure, weather protection and heat control. This is general guidance; the structure and fixing must be designed for local wind and rain.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Roof choice depends on climate, span, noise and how long you want it to last.

If your situation is this, choose that
If you need...ConsiderWhy
Multi-storey or terrace useRCC slabStrong and usable; needs waterproofing.
Light shed or warehouseMetal sheetsFast and light; plan for heat and noise.
Sloping traditional lookClay or concrete tilesDurable look; needs a stronger frame.
Daylight skylightPolycarbonateBrings light; check UV-protected grade.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
RCC flat slabHigherMulti-storey houses and usable terraces.Needs proper waterproofing and slope
Metal roof sheets (GI / coated)Lower to mediumSheds, industrial and light-weight roofs.Hot and noisy without insulation
Clay / concrete roof tilesMedium to higherPitched roofs in sloped designs.Heavy
Polycarbonate sheetsMediumSkylights, patios, covered walkways.Heat gain

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

RCC flat slab

Standard: IS 456 design

Relative cost: Higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Permanent, usable terrace
  • Good fire resistance

Disadvantages

  • Needs proper waterproofing and slope
  • Heavy, hot without insulation

Best for

Multi-storey houses and usable terraces.

Avoid

Skipping waterproofing and drainage design.

Metal roof sheets (GI / coated)

Standard: Product-specific

Relative cost: Lower to medium

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Light, quick to install
  • Wide colour range

Disadvantages

  • Hot and noisy without insulation
  • Coating damage leads to rust

Best for

Sheds, industrial and light-weight roofs.

Avoid

Bedrooms directly under bare metal.

Clay / concrete roof tiles

Standard: Product-specific

Relative cost: Medium to higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Traditional look
  • Good thermal behaviour

Disadvantages

  • Heavy
  • Needs a proper timber or steel frame

Best for

Pitched roofs in sloped designs.

Avoid

Under-designed framing.

Common mistakes

  • Under-sizing purlins and fixings.
  • Ignoring slope for drainage.
  • Using untreated metal in coastal areas.

Ask the shop

  • What coating and thickness does the sheet have?
  • What warranty applies?
  • How are fasteners sealed?

Words you will hear

Purlin
Horizontal beam supporting roof sheets.
Slope
Roof angle that drains water.
Coated sheet
Metal sheet with protective colour layer.

Next steps

How to choose

  • Confirm the structure can carry the roof dead load.
  • Think about heat and noise: bare metal in sun and rain is hot and loud without insulation.
  • Use matching fasteners and flashings from the same system.
  • Plan access and maintenance from the start.

Sources and how far to trust them

Limits of this comparison: Qualitative guidance. No weight, life or price figures are given because they vary by product and design.

This category uses general professional guidance, not quoted standard values. Read the product data sheet and ask for test reports.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More envelope comparisons