Skip to content
SPSDPSPlanning & Building Tools

Beam Concrete Calculator

Calculate concrete volume and cement, sand and aggregate for rectangular beams from width, depth and length.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Beam volume is width x depth x length. Enter the total length of all beams of the same size.

Who should use it: Homeowners, DIY builders and contractors planning a project.

Formula used

  • Volume = width x depth x length

Worked example

40 ft of 230 x 450 mm beam.

Concrete volume (with wastage)

1.32 m3

Cement

11 bags (50 kg)

Sand

0.56 m3

Aggregate

1.11 m3

Detailed results
Concrete volume46.79 cft

How this was calculated

  1. 1Volume: 0.230 x 0.450 x 12.19 = 1.262 m3

Quantity estimate only. Structural members must be designed by a qualified structural engineer.

Beams cast with a slab share concrete; avoid counting the slab depth twice.

How to measure

  • Take sizes and lengths from the structural drawing.

Assumptions and limitations

  • Straight rectangular beams.
  • Depth below the slab only if cast together with it.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Why do beams need design?

Span and load decide depth and steel. Wrong size can be unsafe.