Skip to content
SPSDPSPlanning & Building Tools

Column Concrete Calculator

Calculate concrete volume, cement bags, sand and aggregate for rectangular or round columns.

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

Column volume is its cross-section area times height. Enter the number of identical columns to get the total.

Who should use it: Homeowners, DIY builders and contractors planning a project.

Formula used

  • Area = width x depth (or pi x d^2 / 4)
  • Volume = area x height x number of columns

Worked example

Four 230 x 300 mm columns, 10 ft high, M20.

Concrete volume (with wastage)

0.88 m3

Cement

8 bags (50 kg)

Sand

0.37 m3

Aggregate

0.74 m3

Detailed results
Concrete volume31.19 cft

How this was calculated

  1. 1Volume: 0.0690 m2 x 3.05 m x 4 = 0.841 m3

Quantity estimate only. Structural members must be designed by a qualified structural engineer.

How to measure

  • Use the finished size from the drawing.

Assumptions and limitations

  • Straight, uniform columns.
  • Reinforcement volume is ignored.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Can I choose the size myself?

No. Column size and steel come from a structural design.