Brick Calculator
Estimate the number of bricks, cement and sand for a wall from its area, thickness and brick size.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
The brick calculator finds the wall volume, divides it by the volume of one brick plus its mortar joints, and uses the leftover volume to estimate the mortar.
Who should use it: Homeowners, masons and students estimating brickwork.
Formula used
- Wall volume = (wall area - openings) x thickness
- Bricks = wall volume / ((l + j)(w + j)(h + j))
- Mortar = wall volume - bricks x l x w x h
Worked example
200 sq ft wall using modular 190 x 90 x 90 mm bricks, 90 mm thick.
Bricks to buy (with wastage)
878 pieces
Mortar cement
3 bags (50 kg)
Mortar sand
0.42 m3
| Bricks without wastage | 837 pieces |
|---|---|
| Wall volume | 1.67 m3 |
How this was calculated
- 1Wall volume: net area x thickness = 1.672 m3
- 2Bricks count: volume / unit volume with joint = 836.1
- 3Mortar: wall volume - bricks volume = 0.385 m3 wet
This estimates materials only. Load-bearing walls must be designed by a qualified engineer.
How to measure
- Measure wall length and height separately and multiply.
- Use the actual brick size from your supplier.
Assumptions and limitations
- The wall thickness is a multiple of brick dimensions.
- Brick sizes are nominal presets and vary by manufacturer.
- Mortar uses a dry factor of 1.27.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
How many bricks are in one cubic metre?
With a 10 mm joint, modular bricks give about 500 per m3 of masonry. This calculator computes it for your own sizes.
References
- IS 2212 - Code of practice for brickwork. Consult the current edition.