Plaster Calculator
Calculate cement and sand for wall plaster from area, thickness and mortar ratio.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Plaster volume is area multiplied by thickness. The dry volume of cement and sand is larger than the wet plaster volume because loose sand contains voids - this calculator handles that conversion for you.
Who should use it: Homeowners and masons estimating internal or external plaster.
Formula used
- Plaster volume = area x thickness
- Dry volume = volume x (1 + wastage %) x dry factor (about 1.27)
- Cement bags = cement volume / 0.0347 m3
Worked example
500 sq ft of internal plaster, 12 mm thick, 1:4 mix.
Cement
5 bags (50 kg)
Sand
0.62 m3
| Plaster volume | 0.56 m3 |
|---|---|
| Sand | 22 cft |
| Plaster area | 500 sq ft |
How this was calculated
- 1Wet volume: area x thickness = 0.557 m3
- 2Dry volume: x wastage x 1.27 = 0.779 m3
How to measure
- Measure the wall area to be plastered, deducting large openings.
- Ask the mason for the planned thickness; 12 mm is common for internal walls.
Assumptions and limitations
- Uniform thickness. Uneven walls consume more.
- Dry factor 1.27 is a common estimating figure for mortar.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Which mix should I use?
Follow your engineer or specification. Richer mixes are used where more strength is needed.
References
- IS 1661 - Code of practice for application of cement and cement-lime plaster finishes. Consult the current edition.
- IS 2250 - Code of practice for preparation and use of masonry mortars. Consult the current edition.