Skip to content
SPSDPSPlanning & Building Tools

Compound Wall Brick Calculator

Estimate bricks and mortar volume for a boundary or compound wall from length, height and thickness.

%

Your results will appear here

Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.

About this calculator

The brick count comes from the wall volume divided by the volume of one brick including its mortar joint.

Who should use it: Homeowners, DIY builders and contractors planning a project.

Formula used

  • Wall volume = length x height x thickness
  • Bricks = wall volume / (brick + joint) volume
  • Mortar = wall volume - bricks x brick volume

Worked example

100 ft wall, 6 ft high, 230 mm thick.

Bricks to buy

6,731 bricks

Wall volume

12.82 m3

Detailed results
Mortar volume (wet)2.96 m3
Bricks before wastage6,411 bricks

How this was calculated

  1. 1Brick with joint: 0.200 x 0.100 x 0.100 m

Pillars, foundation and coping are not included. Boundary walls need proper foundations and stability checks.

How to measure

  • Measure the total wall length.
  • Use the thickness you plan (115 or 230 mm are common).

Assumptions and limitations

  • Standard modular brick 190 x 90 x 90 mm with 10 mm joints.
  • No openings.

This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.

Frequently asked questions

Do I need pillars?

Long walls usually need pillars and foundations. Ask an engineer.