Footing Concrete Calculator
Calculate concrete and materials for isolated footings, from length, width, depth and number of footings.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Each isolated footing is a rectangular block. Multiply by the number of footings for the total.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Volume = length x width x depth x number
Worked example
Six 4 x 4 ft footings, 450 mm deep.
Concrete volume (with wastage)
4.21 m3
Cement
34 bags (50 kg)
Sand
1.77 m3
Aggregate
3.54 m3
| Concrete volume | 148.82 cft |
|---|
How this was calculated
- 1Volume: 1.22 x 1.22 x 0.45 m x 6 = 4.013 m3
Quantity estimate only. Structural members must be designed by a qualified structural engineer.
Footing size depends on soil bearing capacity and load; it must come from an engineer.
How to measure
- Use dimensions from the foundation drawing.
Assumptions and limitations
- Flat rectangular footings, no sloped sides.
- Lean concrete layer is not included.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
Does this include PCC below the footing?
No. Calculate that separately with the concrete calculator.