Wall Tile Calculator (Bathroom and Kitchen)
Calculate wall tiles and boxes for a bathroom, kitchen dado or backsplash, after deducting doors and windows.
Your results will appear here
Check the inputs on the left and press Calculate. Every result shows its working so you can verify it.
About this calculator
Wall tiling covers the wall area up to your chosen tile height, minus openings. This calculator also adds the grout joint and wastage and rounds up to whole boxes.
Who should use it: Homeowners, DIY builders and contractors planning a project.
Formula used
- Tiled area = perimeter x tiling height - openings
- Tiles = tiled area / ((length + joint) x (width + joint))
- Buy = tiles x (1 + wastage), rounded up to whole boxes
Worked example
A 8 x 6 ft bathroom tiled to 7 ft with 600 x 300 mm tiles.
Wall tiles to buy
175 tiles
Boxes
30 boxes
| Tiled wall area | 311 sq ft |
|---|---|
| Tiles before wastage | 159 tiles |
How this was calculated
- 1Tiled area: perimeter x height - openings = 311.0 sq ft
- 2Tiles: area / (tile + joint) area = 159
Full door and window areas are deducted. If the tile line stops below the top of an opening, deduct less.
How to measure
- Measure each wall and the height you will tile to.
- Note door and window sizes.
Assumptions and limitations
- Openings are deducted at full size.
- Tile layout cuts and patterns are covered by the wastage percentage.
This tool gives a planning estimate of quantities. It is not a structural, electrical or engineering design. Confirm important decisions with a qualified professional and your product data sheets. Read the full disclaimer.
Frequently asked questions
How much wastage for wall tiles?
Many people allow around 10%; more for diagonal or patterned layouts and small rooms.