Skip to content
SPSDPSPlanning & Building Tools

Flooring materials compared

This comparison is general professional guidance - flooring performance depends so much on the specific product that no single number is reliable. Use it to shortlist, then read each product's data sheet.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Choose per room: wet and busy rooms need tile or stone; bedrooms can take warmer floors.

If your situation is this, choose that
If you need...ConsiderWhy
Kitchen, bathroom, balconyTile (anti-skid in wet areas)Handles water and cleaning.
Bedroom with a warm, soft feelLaminate, vinyl or woodWarmer underfoot; keep away from standing water.
Hot climate, natural lookStone (Kota, marble, granite)Cool surface; needs sealing and care.
Tight budget, DIY-friendlyVinyl or laminate click floorsQuick to fit on a flat, dry sub-floor.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
Vitrified tileMediumLiving rooms, kitchens, balconies (choose right group).Cold and hard underfoot
Natural marbleHigherLow-spill living areas and feature floors.Stains and etches with acids
GraniteMedium to higherSteps, kitchen counters, high-traffic floors.Heavy
Kota / limestone stoneLower to mediumLarge floors, terraces, traditional styles.Can stain
LaminateMediumDry bedrooms and living rooms.Swells if water gets in
Vinyl / LVTMediumBedrooms, kitchens and flats where weight and comfort matter (check the product rating).Can dent under heavy point loads
Engineered / solid woodHigherDry living and bedroom areas.Sensitive to moisture and humidity

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

Vitrified tile

Standard: IS 15622

Relative cost: Medium

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Durable
  • Easy to clean
  • Huge design range

Disadvantages

  • Cold and hard underfoot
  • Grout lines need care

Best for

Living rooms, kitchens, balconies (choose right group).

Avoid

Polished finish in wet areas.

Natural marble

Standard: Natural stone

Relative cost: Higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Distinctive natural pattern
  • Cool in hot climates

Disadvantages

  • Stains and etches with acids
  • Needs sealing and polishing
  • Slab-to-slab variation

Best for

Low-spill living areas and feature floors.

Avoid

Kitchens with heavy spills unless well sealed.

Granite

Standard: Natural stone

Relative cost: Medium to higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Hard, scratch-resistant surface
  • Good for steps and counters

Disadvantages

  • Heavy
  • Narrower colour range
  • Some types need sealing

Best for

Steps, kitchen counters, high-traffic floors.

Avoid

Where a warm, soft surface is wanted.

Common mistakes

  • Laying wood or laminate over damp concrete without a moisture barrier.
  • Ignoring the sub-floor level, which telegraphs through thin floors.
  • Skipping expansion gaps on floating floors.

Ask the shop

  • What is the wear layer or surface rating?
  • Is it suitable for my room (wet, sunlight, under-floor heating)?
  • What warranty applies and what voids it?

Words you will hear

Sub-floor
The base the finished floor sits on.
Wear layer
The top layer that resists scratches and traffic.
Floating floor
Planks joined to each other, not glued to the base.

Next steps

How to choose

  • Decide room by room: wet, high-traffic, or comfort-focused.
  • Check the sub-floor: level, dry and clean for floating floors.
  • Ask for slip resistance, wear layer and warranty terms in writing.
  • Order spare material from the same batch.

Sources and how far to trust them

Limits of this comparison: Qualitative guidance only. No hardness, thickness or price figures are given because they vary by product.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More finishes comparisons