Skip to content
SPSDPSPlanning & Building Tools

Interior paint types compared

Paint categories matter less than the product's technical data sheet, but the category tells you what to expect from washability, finish and surface preparation.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Pick finish by room use and washability; always prepare the wall first. Good prep beats expensive paint.

If your situation is this, choose that
If you need...ConsiderWhy
Living room and bedroom wallsAcrylic emulsionWashable and available in many finishes.
Wood and metal (doors, grills)EnamelHard finish for wood and metal, not for walls.
Feature wall with textureTexture paintHides surface flaws; harder to repaint.
Lowest cost, dry low-traffic ceilingsDistemperLess washable; not for kitchens or damp areas.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
DistemperLowerDry interior walls and ceilings on a tight budget.Limited washability
Acrylic emulsionMedium to higherInterior walls and ceilings in most rooms.Needs good surface preparation
EnamelMedium to higherDoors, window frames, grills and railings.Gloss shows surface defects
Texture paintHigherFeature walls.Hard to repaint evenly

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

Distemper

Standard: Product-specific

Relative cost: Lower

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Economical
  • Quick to apply

Disadvantages

  • Limited washability
  • Low moisture resistance

Best for

Dry interior walls and ceilings on a tight budget.

Avoid

Kitchens, bathrooms and damp walls.

Acrylic emulsion

Standard: Product-specific

Relative cost: Medium to higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Good finish and colour range
  • Washable grades available

Disadvantages

  • Needs good surface preparation
  • Costs more than distemper

Best for

Interior walls and ceilings in most rooms.

Avoid

Bare, damp plaster without primer.

Enamel

Standard: Product-specific

Relative cost: Medium to higher

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Hard, easily wiped film
  • Good on wood and metal

Disadvantages

  • Gloss shows surface defects
  • Some products smell strongly

Best for

Doors, window frames, grills and railings.

Avoid

Large flat walls where defects will show.

Common mistakes

  • Painting over damp or flaking surfaces.
  • Skipping primer on fresh plaster.
  • Judging colour from a small chip under shop lights.

Ask the shop

  • What is the washability class and coverage on the data sheet?
  • Is a primer required and which one?
  • What is the recoat time?

Words you will hear

Sheen
How glossy the finish is (matt to gloss).
Primer
Base coat that seals the wall and helps paint stick.
VOC
Volatile compounds that cause smell; lower is better.

Next steps

How to choose

  • Match the paint to the surface (wall, wood or metal).
  • Check the data sheet for coverage, recoat time and washability class.
  • Prepare the surface first: fill, sand, prime.
  • Test the shade on the wall in daylight and at night.

Sources and how far to trust them

Limits of this comparison: Qualitative guidance. Coverage, VOC level and washability are product-specific.

This category uses general professional guidance, not quoted standard values. Read the product data sheet and ask for test reports.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More finishes comparisons