ConstructionIntermediate7 min read
Cement and Concrete Basics for Homeowners
What cement types, mix, water and curing mean, and the simple site practices that make concrete last.
1Cement types
OPC (grades 43 and 53), PPC and slag cement are common. The right one depends on use, climate and your engineer's specification. See the cement comparison for details.
2What makes concrete strong
- Clean sand and aggregate.
- Correct mix proportions as specified.
- Low water-cement ratio - extra water weakens concrete.
- Proper compaction without voids.
- Curing: keep concrete damp after setting.
3On site
- 1Check cement date and storage.
- 2Measure materials by volume or weight, not by guess.
- 3Mix thoroughly.
- 4Place and compact within the time the mix stays workable.
- 5Cure as long as your engineer advises.
4Use the calculators
The concrete and RCC slab calculators estimate volumes of cement, sand and aggregate. Treat results as planning estimates and follow the engineer's mix design.
Mistakes to avoid
- Adding water to make mixing easier.
- No curing in hot weather.
- Using old hardened cement.
Quick answers
Can I make structural concrete myself?
Structural work needs design and supervision by a qualified engineer.
Go deeper
Try the calculators
Concrete Calculator (Cement, Sand, Aggregate)Calculate concrete volume and the cement bags, sand and aggregate needed for a slab, footing or column by nominal mix.RCC Slab Quantity CalculatorEstimate concrete volume, cement, sand, aggregate and a rough steel quantity for an RCC slab. Estimate only - not a design.Plaster CalculatorCalculate cement and sand for wall plaster from area, thickness and mortar ratio.
Keep reading
Guidance is general and for planning only. Check product data sheets, local rules and your professionals. Read the disclaimer.