Skip to content
SPSDPSPlanning & Building Tools

LED lighting types compared

LED is the usual choice today. The fixture type decides light spread, glare and installation.

Cost tiers are RELATIVE only (lower / medium / higher). SPSDPS does not publish current prices - get written local quotations.

The short answer

Pick the fixture type by room, then check lumens and warmth, not watts.

If your situation is this, choose that
If you need...ConsiderWhy
Replace old bulbsLED bulbFits existing holders.
Clean ceiling in a false-ceiling roomDownlights or COBPlan placement to avoid glare.
Soft accent or under-cabinet lightLED stripUse a good driver.
Bright utility spaceBattenCheap and bright.

All options at a glance

All options at a glance
OptionRelative costBest forWatch out for
LED bulbLowerLamps and replacements.Limited light spread
Recessed downlight / COBMediumLiving rooms and kitchens with false ceiling.Needs false ceiling
LED panel lightMediumOffices and kitchens.Plain look
Batten / tube lightLowerUtility rooms and garages.Harsh look
LED strip lightLower to mediumAccent and task lighting.Needs a driver

Compare side by side

Choose up to 3 to compare

The check mark shows an option that has figures verified against a cited source.

LED bulb

Standard: Product-specific

Relative cost: Lower

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Fits existing holders
  • Cheap

Disadvantages

  • Limited light spread

Best for

Lamps and replacements.

Avoid

Enclosed hot fittings not rated for them.

Recessed downlight / COB

Standard: Product-specific

Relative cost: Medium

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Clean ceiling look

Disadvantages

  • Needs false ceiling
  • Glare if badly placed

Best for

Living rooms and kitchens with false ceiling.

Avoid

Directly on bare slab.

LED panel light

Standard: Product-specific

Relative cost: Medium

Specifications

No standard values quoted. Compare using the product data sheet and a batch test report.

Advantages

  • Even light

Disadvantages

  • Plain look

Best for

Offices and kitchens.

Avoid

Cosy living spaces.

Common mistakes

  • Choosing by watts instead of lumens.
  • Mixing very different colour temperatures.
  • Using cheap strips and drivers.

Ask the shop

  • How many lumens and what colour temperature?
  • Is it dimmable and with which dimmer?
  • What is the driver warranty?

Words you will hear

Lumen
The amount of light produced.
Kelvin (K)
Light colour warmth.
Driver
The power supply of an LED fitting.

Next steps

How to choose

  • Check lumens, not watts, for brightness.
  • Choose warm or neutral light by room use.
  • Look for a driver warranty.
  • Use dimmable fixtures where mood matters and check dimmer compatibility.

Sources and how far to trust them

Limits of this comparison: Qualitative guidance only. No strength, thickness, rating or price figures are quoted because they vary by product. Check each maker's data sheet.

This category uses general professional guidance, not quoted standard values. Read the product data sheet and ask for test reports.

Standards are revised. Confirm any value you rely on against the current edition on the BIS website. Information is for planning, not a specification.

More services comparisons